Synco Industries Limited



25% Alumina Zirconia Grains For Coated And Bonded Abrasives


25% Alumina Zirconia Grains For Coated And Bonded Abrasives

The 25% Alumina Zirconia Grains For Coated And Bonded Abrasives that we deal in is quality assured and is obtainable from us in bulk orders. We have the ability to meet even the bulk requirements of the buyers with the guaranty of timely deliveries.

More about 25% Alumina Zirconia Grains For Coated And Bonded Abrasives :

  • AZ25 is an electro-fused alumina zirconia grain, produced by fusing high grade alumina and zirconia at about 2000 temperature in an electric arc furnace. And then by quenching, crushing and sizing to the desired grain sizes. This alumina-zirconia(25%) grain consists of the fine primary Corundum as well as ZrO2-Al2O3 eutectic crystalline. This microstructure offers the high intrinsic grain strength and high wear resistance to dulling. AZF25 is a hard, very tough and sharp abrasive material for uses in producing large grinding wheels for foundry snagging. AZS25 is a re-shaped product based on the original AZF25 material. The grain has a very blocky shape with rounded and mulled edges, it is used mainly for producing large organic grinding wheels for steel conditioning industry.
  • We supply this product in collaboration with Pangea International Ltd., China of whom we are exclusive agents.
  • Applications Product Code Grain Shape Treatment Sizing Convention Bulk Density Grain Sizes Applications AZF25 Strong Untreated ANSI1.85-2.38 g/cm3 4-220 Bonded AZS25 Strong Untreated ANSI2.25-2.36 g/cm3 4-36 Bonded